لا توجد منتجات
قسم فرعي
[Only available until stock depleted]
[Only available until stock depleted]
[Only available until stock depleted].
[Only available until stock depleted].
Bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and 1.8V devices. Size: 28 x 19mm / 1.1 x 0.74 inch
[Only available until stock depleted]
[Only available until stock depleted]
[Only available until stock depleted].
[Only available until stock depleted].
MX485 chip is a low power consumption for RS-485 communication5.08 (mm) pitch 2P terminalAll pins can be controlled through the microcontroller Operating voltage: 5V Size: 44 (mm) x14 (mm)
[Only available until stock depleted]
Max Data Rate 120kbps Size:- 9.4mm x 15.9mm
It is easily interfaced as a peripheral to your arduino sensor shield module. Via programming, you can read and write to the SD card using your arduino. Can be used for SD Card more eaisly, such as for MP3 Player, MCU/ARM system control. All SD SPI pins output, MOSI, SCK, MISO and CS. Supports 5V/3.3V input
[Only available until stock depleted]
Dimensions: 4 x 3.2 x 1.3cm Maximum 1 Amp per pin