No products
3D Printed Items
- Active components
- Bargain Packs
- Batteries
- Circuit Prototyping
- Component Selection Packs
- Computer Related
- Consumer Products
- Craft Supplies
- Electromechanical
- Interesting Old Stock or Used Items/Modules
- Kits
- Labels / Paper Goods
- Measuring / Test Equipment
- Mechanical Hardware
- 3D Printed Items
- Bearings
- Brackets
- Cable Clips
- Cable ties
- Carabinas
- Compressed Air Fittings
- Cotter / Split Pins
- Drive Belts
- Enclosure Accessories (Handles, Protective corners e.t.c.)
- Enclosures / Boxes
- Eurorack / Subrack Parts
- Fan Guards
- Feet
- Grommets / Strain Reliefs
- Heatsinks
- Hose Clamps / Jubilee Clips
- Knobs
- Locks and accessories
- Magnets
- Nuts
- Other mechanical parts
- PCB Standoffs / Spacers / Pillars
- Pop Rivets
- Screws (Machine)
- Screws (Self Tapping and for Plastic)
- Springs
- Wall Plugs / Anchors / Rawplugs
- Washers
- Modules and Circuit Building Blocks
- Passive components
- Power Supplies
- Sensors
- Services
- Tools
- Wire and Cable
3D Printed Items There are 52 products.
Red, Open Centre Knob, for LED lit...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:2580340 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
0,23€In StockBlue, Open Centre Knob, for LED lit...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:2580340 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
0,23€In StockBeige, Open Centre Knob, for LED lit...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:2580340 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
0,23€In StockBrown, Open Centre Knob, for LED lit...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:2580340 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
0,23€In StockGreen, Open Centre Knob, for LED lit...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:2580340 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
0,23€In StockYellow, Open Centre Knob, for LED lit...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:2580340 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
0,23€In StockPink, Open Centre Knob, for LED lit...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:2580340 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
0,23€In StockPurple, Open Centre Knob, for LED lit...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:2580340 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
0,23€In StockGrey, Open Centre Knob, for LED lit...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:2580340 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
0,23€In StockWhite, Open Centre Knob, for LED lit...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:2580340 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
0,23€In Stock
0,59€ In StockJumper wire rack (1pc - 2 needed), plastic...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:3122225 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
0,59€In Stock
0,71€ In StockWire Antenna Insulator, Printed in ABS for...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:299896 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
0,71€In Stock
0,95€ In Stock11mm Nut driver for front panels (doesn't...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:2622492 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
0,95€In Stock
0,95€ In Stock8mm Nut driver for front panels (doesn't...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:2622492 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
0,95€In Stock
0,95€ In Stock10mm Nut driver for front panels (doesn't...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:2622492 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
0,95€In Stock
0,95€ In Stock13.8mm Nut driver for front panels...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:2622492 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
0,95€In Stock
1,06€ In Stock8mm Nut driver for front panels (doesn't...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:5059677 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
1,06€In Stock
1,06€ In Stock10mm Nut driver for front panels (doesn't...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:5059677 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
1,06€In Stock
1,06€ In Stock11mm Nut driver for front panels (doesn't...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:5059677 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
1,06€In Stock
1,06€ In Stock8mm Nut driver for front panels (doesn't...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:5059677 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
1,06€In Stock
1,18€ In StockPocket Handle for screwdriver bits, 3D...
Printed from this design:- https://www.thingiverse.com/thing:461492 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
1,18€In Stock
1,18€ In StockTermanal Cover for Meanwell (possibly...
Printed from this design:- https://www.thingiverse.com/thing:3864223 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
1,18€In Stock
1,18€ In StockAir tool holder, Yellow, ABS
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:5071780I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
1,18€In Stock
1,18€ In StockWire Antenna Insulator, Egg Type, Printed...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:3480649 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
1,18€In StockEconomy Wide IC leg straightener, 3D...
3D Printed in ABS from this design:-https://www.thingiverse.com/thing:5320028 This item needs the channels opening a bit for most IC legs, pass ~500grit sandpaper through both channels a few times to get "Standard" pin width I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
1,18€In StockEconomy Slim IC leg straightener, 3D...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:4927232 This item needs the channels opening a bit for most IC legs, pass ~500grit sandpaper through both channels a few times to get "Standard" pin width I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
1,18€In Stock
1,54€ In StockSpray Can holder , 55mm diameter cans...
3D Printed in ABS from this design:- I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
1,54€In Stock
1,78€ In StockRadius Ruler, Purple / Yellow, ABS
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:514172I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
1,78€In Stock
1,78€ In StockSmall paint mixer for battery drill, 3D...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:5553700 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
1,78€In Stock
1,78€ In StockWire Antenna winder, Printed in ABS for...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:5569326 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
1,78€In Stock
1,78€ In StockSpray Can holder , 65mm diameter cans,...
3D Printed in ABS from this design:- I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
1,78€In Stock
1,79€ In Stock3D Printed OLED Stand, for EuroPi synth...
3D Printed in ABS from this Project:- https://github.com/Allen-Synthesis/EuroPi/blob/main/hardware/EuroPi/OLED_Stand/readme.md
1,79€In Stock
2,09€ In StockSolder Cableholder, Purple, ABS
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:1203831I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
2,09€In Stock
2,09€ In Stock3D Printed OLED Stand (Pi Hut Version),...
3D Printed in ABS from this Project:- https://github.com/Allen-Synthesis/EuroPi/blob/main/hardware/EuroPi/OLED_Stand/readme.md
2,09€In Stock
2,38€ In StockBattery Storage tube (CR2032 & CR2025), 3D...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:6415779 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
2,38€In Stock
2,38€ In StockRazor Blade Storage Box, 3D printed in ABS
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:6820502 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
2,38€In Stock
2,38€ In StockMetric screws, nuts and bolts sizing and...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:4578338 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
2,38€In Stock
2,38€ In StockExtremely loud and compact emergency...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:2933021I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
2,38€In Stock
2,38€ In StockHand Drill with Chuck, for cutting...
Printed from this design:- https://www.printables.com/model/132326-push-drill-with-adjustable-chuck/files I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
2,38€In Stock
2,38€ In StockBreadboard Jumper Tool, for forming jumper...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:4973390 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
2,38€In Stock
2,98€ In StockCable Hanger, Black, Screw Mount, 3D...
Printed from this design:- https://www.thingiverse.com/thing:4618026 Doesn't include screws, mounting holes are 5mm diameter I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
2,98€In Stock
2,98€ In StockCable Hanger, Green, Screw Mount, 3D...
Printed from this design:- https://www.thingiverse.com/thing:4618026 Doesn't include screws, mounting holes are 5mm diameter I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
2,98€In Stock
2,98€ In StockDIY Solder Fume Extractor frame, 3D...
Printed from this Design:- https://www.thingiverse.com/thing:1876845 This is just the frame, you need to add:- A Fan (80x80) - I have plenty of New or Used fans in the shop, or they are readily available to be stripped from old electronic equipment. A PSU for your fan (nomally 12V), again plenty in the shop. 4 Screws to mount the fan A...
2,98€In Stock
2,98€ In StockScrewdriver bit case, 3D printed in ABS
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:2920911 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
2,98€In Stock
2,98€ In StockMini Sanding Block, Printed in ABS
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:4633924 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
2,98€In Stock
3,58€ In StockHex screwdriver bit holder, 100 holes, 3D...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:4551835 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
3,58€In Stock
3,58€ In StockScrew and Nut Quick Measuring Tool, Metric...
Printed from this Design:-https://www.thingiverse.com/thing:6596461 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
3,58€In Stock
3,58€ In StockSD card, USB and screwdriver holder, 3D...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:6630289 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
3,58€In Stock
3,58€ In StockEurorack Rail mounts for 19" Rack, set of...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:3578483 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
3,58€In Stock
3,58€ In StockWall mount Drill bit holder, 1-10mm (0.5mm...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:2721229 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
3,58€In Stock
5,97€ In StockMetric Drill Bit Holder, 1-10mm in 0.5mm...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:5187515 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
5,97€In Stock
5,97€ In StockMinimal Desktop eurorack stand sides, 3D...
3D Printed in ABS from this design:- https://www.thingiverse.com/thing:4923072 I can print this item in many colours and materials, mail me if you want something different:- damian@dsmcz.com
5,97€In Stock
