No products
Subcategories
No Data, but easy to trace out. Looks like it was Transformer Input, Bridge Rectifier, Smoothing Caps, Transistor Regulation, Output Fuse, with connections for panel meters.
This kit is a 2 Transistor Guitar Fuzz Effect. I've made it so it will give as wide a range of sounds as is possible. If you want a calmer distortion, resistors can be added around the potentiometers to tune the sound to your liking. Full Build instructions here:- http://build.dsmcz.com Sound Sample:- https://youtu.be/3llrhr1Tg3s Review:-...
Can drive an 8 x 8 common cathode lattice Module has input and output interfaces, they can be daisy chainedOperating voltage: 5V Mountable with 4xM3 screwsVCC - 5V GND - GND DIN - P22 CS - P21 CLK - P20 Size of the borad: 5 x 3.2 cm
Board size. 53mm*19mm Supply Voltage :2.5 - 14 .5 V Adjust R4 to change the flow rate
[Only available until stock depleted] Makes it easy to check battery status. Red, Yellow and Green LED's. Trimmer Resistors let you adjust the voltage threshold to turn each LED on. SO it could be set so Yellow is Normal, and Green is Charging (in a Car), or the LED's indicate Battery depletion (in an application like an electric fence battery).
I/P V=14.5-30V, O/P V=12V, Max Current=1.5A PCB 49x21mm
This kit is a budget function generator kit. It outputs Square, Triange and Sine waves simultaneously. Frequency is adjustable from approx 20Hz to 20kHz Full Build instructions here:- http://build.dsmcz.com/files/Function%20Generator%20Kit%20(Stripboard).pdf
This circuit boosts the voltage from a flat AA battery, using up the last of the power in the battery, which normally would be unusable.The completed torch is quite bright, comparible to the LED Torch built into a smartphone. Complete build instructions are available at:- http://build.dsmcz.com The Circuit can take upto 5.5V input, and the LED's switch...
For this project:- https://vonkonow.com/leet-modular/All parts for this project are in the eshop
Supply Voltage 3.7-5V PCB 48mmx26mm 5uA current draw J1 - Trigger Alarm J2 External O/P
Operating voltage :4.5-5V PCB size: 48mm (length) * 42mm (W) coding(ABCD) 0000:Machine gun voice 0001:Fire truck voice 0010:Ambulance voice 0011:The police car voice 0100:Crickets sound 0101:alarm 0110:Electronic signal sound 0111:koh 1000:Insect song 1001:whistle 1010:Telegraph sound 1011:Bird song 1100:ChongJi gunfire 1101:Car sirens 1110:Bass...
This kit is a 2 Transistor Guitar Fuzz Effect. I've made it so it will give as wide a range of sounds as is possible. If you want a calmer distortion, resistors can be added around the potentiometers to tune the sound to your liking. Full Build instructions here:- http://build.dsmcz.com Sound Sample:- https://youtu.be/3llrhr1Tg3s Review:-...